Laboratory Equipments

Double Body has single chamber for steam and water, covered externally by outer shell. Inner body made of heavy gauge stainless steel LM 304 grade with argon welded joints, outer body made of SS mirror finished lid made of thick stainless steel pressure upto 22 PSI set at 15 PSI. Complete with pressure gauge, safety valve, steam release valve, extra safety valve. Foot lifting arrangement included for size 18” × 24” × 30” not included / required for lower sizes.
Size of Working Chamber Volume

Actual Size cm	Inner Chamber	Size
25 dia × 45 ht	22	10” × 22”
30 dia × 50 ht	35	12” × 24”
35 dia × 50 ht	52	14” × 26”
45 dia × 50 ht	95	18” × 28”
55 dia × 50 ht	175	22” × 40”

With electric motor, fitted with metal bowl and lid, about 3600 revolutions per minute, electrically operated, controlled with rotary switch. In operation all parts remain cool even after long period of use. The motor and controls are totally enclosed for safety. The motor is supported on flexible rubber mountings which make critical balancing of the tubes. The centrifuge is ready for use with three-core cord and plug. Works on 220 Volts A.C. supply.

Hand driven, can give 2000 to 3000 revolutions per minute, with clamping device for fixing to table, pin connection to accommodate tubes for head and crank.
A) Two tubes model.
B) Four tube model.

Aluminium construction duly powder coated to good finish, heating net made of fibre glass yarn. With built in energy regulator & pilot lamps. Maximum surface temperature - 450° C.

Size	Watts	Size	Watts
100 ml	150	5 Ltr	750
250 ml	150	10 Ltr	1200
500 ml	300	20 Ltr	2000
1 Ltr	400	50 Ltr	4000
2 Ltr	500	100 Ltr	6000
3 Ltr	450

Electric round made of cast iron top of 21.5 cms dia and thick mild steel body with energy regulator.

Electronically controlled, double walled in construction exterior made of mild steel with powder coated finish, interior made of stainless steel glasswool insulation full length inner door with magnetic gasket and lock. Unit consists of digital temperature controller cum indicator, resolution 0.1° C with suitable sensor, provided with forced air circulation for uniform temperature within the chamber. Hermetically sealed compressor unit with electronic time delay to safeguard compressor, castor wheels for easy movability, automatic chamber light. Unit works on 230V AC 50 Hz supply. Temperature range 5 to 60°C. Accuracy ± 0.5°C.

Double walled, outer made of mild steel duly powder coated and inner made of either mild steel or stainless steel. Gap between the two walls filled with glasswool. Electrically operated on 230V AC. Thermostatic Heat Control. Supplied with GI Wire mesh. Temperature range: 5°C above ambient (room temp.) to 250°C.

Temperature control, speed regulator and SS Body with coated top plate.
Capacity (ml): 500, 1000.

With stepless speed control and SS Body & Top.
Capacity (ml): 500, 1000.

Rectangular horizontal electric muffle furnace duly powder coated. Working temperature 1150°C, maximum temperature 1200°C complete with built in energy regulator, indicator lamps, pyrometer for temperature indication.
Muffle Size – (in cms)
a) 22 × 10 × 10
b) 25 × 12 × 12
c) 30 × 15 × 15
d) 45 × 22 × 22

Made entirely of stainless steel with concentric rings. Electrically heated with immersion type heater. Temperature range: ambient to 100°C.

For round bottom flask. Thermostatically controlled heating. Entirely made of stainless steel. Temp. range: ambient to 100°C.
Capacity Inner Size
2 Ltrs. Flask 8” × 8”
5 Ltrs Flask 10” × 10”
10 Ltrs. Flask 12” × 12”
20 Ltrs. Flask 16” × 16”

For round bottom flask. Single walled, electrically operated. Made of Stainless Steel. Thermostatically controlled. Temperature range ambient to 100°C.
Capacity Inner Size
a) 2 Ltrs. Flask 8” × 8”
b) 5 Ltrs. Flask 10” × 10”
c) 10 Ltrs. Flask 12” × 12”
d) 20 Ltrs. Flask 16” × 16”

Size (in cms)    No. of holes on lid
35 × 25 × 10    6 holes
40 × 30 × 10    12 holes

Single walled. Made entirely of stainless steel. Lid supplied with holes of 3” dia with concentric rings. Immersion heater of 1000W / 230V is provided. Temperature range: ambient to 100°C.
Size (in cms)    No. of holes on lid
35 × 25 × 10    6 holes
40 × 30 × 10    12 holes

Completely made of stainless steel. Electrically operated to obtain pyrogen free distilled water.
Capacity
a) 2 Ltrs. Per hour
b) 4 Ltrs. Per hour
c) 6 Ltrs. Per hour
d) 8 Ltrs. Per hour
e) 10 Ltrs. Per hour
f) 20 Ltrs. Per hour