620/EL CORK BORER SHARPENERSteel cutting blade is fitted in a slotted steel cone, wooden handle.
621/EL CORK BORERSWith separate handle to each borer, cutting edge at bottom, brass, chromeplated, set complete with cleaning rod.
Set of a)Three b) Six c) Twelve
622/SB CORKS
| No. | Top Dia. mm | Bottom Dia. mm | Height mm | |
| a) | 000 | 6 | 4 | 13 |
| b) | 00 | 8 | 5 | 13 |
| c) | 0 | 10 | 7 | 13 |
| d) | 1 | 11 | 8 | 16 |
| e) | 2 | 13 | 9 | 17 |
| f) | 3 | 14 | 10 | 19 |
| g) | 4 | 16 | 11 | 12 |
| h) | 5 | 17 | 12 | 22 |
| i) | 6 | 19 | 13 | 24 |
| j) | 7 | 21 | 14 | 25 |
| k) | 8 | 22 | 15 | 27 |
| l) | 9 | 24 | 13 | 29 |
| m) | 10 | 25 | 20 | 31 |
| n) | 11 | 27 | 21 | 31 |
| o) | 12 | 29 | 22 | 31 |
| p) | 13 | 30 | 24 | 31 |
| q) | 14 | 32 | 25 | 31 |
| r) | 15 | 33 | 27 | 31 |
| s) | 16 | 35 | 27 | 38 |
| t) | 17 | 36 | 30 | 38 |
| u) | 18 | 38 | 31 | 38 |
| v) | 19 | 39 | 33 | 38 |
| w) | 20 | 41 | 34 | 38 |
623/EL GAS TAPSOxidised or chrome plated. Gas taps of gun metal, with lever handles.
A) Gas Taps - One way
B) Gas Taps - Two way
C) Gas Taps - Three way
D) Gas Taps - Four way
625/ED DEFLAGRATING SPOONImproved with friction sliding disc held by a cork to keep it at any height. Length 350 mm. up dia 18 mm, Disk Dia. 90 mm.
627/NA DISSECTING SETA) Set of seven instruments
Consists of the following:
Dissecting Scissor 5"sharp / blunt ends - 1 pc.
Dissecting Scissor 41/ 2" sharp ends - 1 pc.
Dissecting Forceps 5" blunt tips - 1 pc.
Dissecting Forceps 41/ 2" fine tips - 1 pc.
Knife Handle no. 3 - 1 pc.
Knife handle no. 4 - 1 pc.
Dissecting Needle pointed - 1 pc.
B) Set of 14 instruments
Above 7 instruments and in addition consists of the following :
Dissecting Needle Arrow - 1 pc.
Dissecting Needle Seeker - 1 pc
Dissecting flapper - 1 pc.
Dissecting razor - Stainless Steel - 1 pc.
Dissecting Magnifier 11/2" - 1 pc.
Chain Hooks - 1 pc.
Blow Pipe - 1 pc.